Date: February 20, 2015  |  Author: Ashley Sexton

Flowing concrete…

We are very pleased to have teamed up with Arun Pumpcrete ( very recently to complete a small flowing concrete installation in Gosport. The customer’s floor was beyond repair and the builder decided it was best to dig out the existing floor in this 16 square metre area and start again. After placing a stable, compacted base and a 1,200 gauge damp proof membrane, a 100mm concrete layer was then required. However, depths were tight and access was very limited as the building’s front door was right on the road.

Designed to negate the need to power float, our flowing concretes are suitable as a finished surface on which to place a floor covering, with no need to install a screed. This concrete IS the finished surface. Coupled with Arun Pumpcrete’s flexible, easy access concrete pumps, we pumped right through the front door and the entire installation was completed in less than 2 hours!

View our flowing concrete page for our full product range and detailed specifications.